Printer friendly version Printer friendly version

Puller tool for rotor - (M27x1.25/M12) / Screw (M12)

Rotor puller tool (M27x1.25 / M12) / screw (M12x90)
Product code (SKU):  99 99 799 00
In stock: yes
Weight: 0.25 kg

Rotor puller tool (M27x1.25 / M12) / screw (M12)
Required if rotor fastening by either a nut or bolt (smaller than M10).


Using the correct puller tool is the only safe way to remove your new Powerdynamo rotor if you need to carry out maintenance work in the future (eg. replacing crankshaft oil seals, bearings etc).

DO NOT be tempted to use a claw puller, as there is a very good chance these will destroy the rotor by the flexing which will inevitably occur from exerting such forces on the outside diameter of the rotor. This puller removes the rotor by pulling safely by exerting all forces onto the centre of the rotor with no risk of damage.





Any questions?

Please use the following form to request information.

Your name:


Please specify your question about Puller tool for rotor - (M27x1.25/M12) / Screw (M12):

Type the numbers you see in the picture below

Blog / News
18.09.2014 08:58:09
23.12.2013 13:39:45
24.05.2013 13:29:00
30.04.2013 17:08:46
Subscribe for email newsletter (blog):
or RSS 2.0
Which is your favourite Zschopau built MZ ?